Lighting

Rechargeable Blaze 800 SLX provides the perfect balance of brilliant lumen output and long run times. It has enough power to explore dark off road trails and a variety of modes that light your way no matter where your ride takes you. - Cree XPL LED provides high, medium and low power beam along with Courtesy & Superflash modes - FL1 Tested – Run times: 1.5 hrs (high - 800 lm), 3.7 hrs (medium - 400 lm), 6 hrs (low - 200 lm), 16 hrs (Courtesy 160-270 lm) and up to 32 hrs (Superflash - 800 lm) - Amber side lights provide 275° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP66 standard - Sanyo 3350 mAh lithium ion battery charges in 6.3 hours with micro USB cable (included) - Smart Charging Technology with built in low battery indicator - Quick Twist mount adjusts or removes without tools - Includes Lockout mode - 145 grams

The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt

The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

Put on the high beams for extra visibility even in the dark corners of space. Portland Design Works' Spaceship Headlight boasts 3 bright LEDs which shine through a precision lens for a bright, focused beam. It offers steady and flashing modes and has a run time of over 100 hours. - Fits 22.0-31.8mm handlebars - Runs on 2 x AA batteries (included) - 100 hours run time - Steady and flashing modes - 91 grams/3.2 ounces - 98 x 41 x 35mm

Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike. - Bright red LED and precision reflector - Bolts directly to fender to prevent theft - Weatherproof exterior for all season riding - Weight: 62 g (2.2 oz) - Runs on 2xAAA batteries (included) - Lifetime PDWarranty

Minimal and mighty! The USB rechargeable Asteroid headlight from Portland Design Works mounts in seconds and shines super brightly with high-quality optics so you can be seen. Ride for up to 24 hours before needing a new charge. - 3 Modes (burn time): Flash (24 hrs), Pulse (5 hrs), Steady (4 hrs) - UV Proof rubber mount  - Double-click lens to turn on/off - Micro USB charge cord included - Weatherproof exterior for all season riding - Weight: 73 g (2.6 oz)

Minimal and mighty! The USB rechargeable Asteroid tail light from Portland Design Works mounts in seconds and shines super brightly with high quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Ride up to 35 hours before needing a charge. Pairs nicely with the Asteroid Headlight - also available as a light set. - 3 Modes (burn time): Flash (35 hrs), Pulse (6.5 hrs), Steady (4.5 hrs) - Weatherproof exterior for all season riding - Micro USB recharging cord included - Weight: 76 g (2.7 oz)

Portland Design Works' Radbot 1000 Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and a precision reflector to notify others of your presence. And, the Radbot includes mounts for a rack, seatpost, seatstay, and backpack, so you can put it wherever you want. - 1.0 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty

The PDW USB-rechargeable Io taillight has two super-bright LEDs for a great value, and offers a super-quick charge time of only 2.5 hours. The Io has 3 different modes, steady, flash, and pulse, and is perfect for urban riding. - 3 modes (runtime) Steady (10h) Flash (20h) Pulse (20h) - Seatstay mount included - UV-proof rubber strap bracket for easy on and off included - Includes Micro USB-recharging cord

The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system

Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)

The Portland Design Works Daybot Tail Light has a CREE LED to power a 100 lumen Daytime Pulse mode for increased visibility on sunny days. Switch from Day Modes to Night Modes to conserve battery power. Hold the power button down for 1 second to turn the light on or off. The Daybot Tail Light has redesigned mount that works with the included seatpost and seatstay brackets. - 2 Day Modes (runtime): Solid - 60 lumens (6 hours), Pulse - 100 lumens (20 hours) - 3 Night Modes (runtime): Solid - 20 lumens (20 hours), Flash - 20 lumens (100 hours), Pulse - 20 lumens (30 hours) - USB rechargeable li-polymer battery - Weatherproof exterior for all season riding - Includes brackets for seatpost and seatstay mounting - Mounts vertically or horizontally - Includes Micro USB recharging cord - Weight: 1.9 oz - Lifetime Warranty

The Pathfinder USB Headlight from Portland Design Works is unlike any other bike light on the market, incorporating technologies to help you see and be seen while riding, day or night. The Vertical Cutoff Beam is designed to focus the 200 lumen main beam onto the road in front of you and prevents lost lumens that can blind oncoming traffic. For daytime riding, the Daytime Running Flash is bright enough to make you seen even on the brightest days. The Battery Meter lets you know exactly how much battery life you have left before needing to recharge with the included USB cord. The Pathfinder includes a powerful lithium-ion battery and a darkness destroying CREE LED bulb. It provides superior luminous guidance for up to 25 hours of ride time. The rugged construction is weatherproof and strong enough to handle the abuse of an urban commute. - 4 Modes: Steady low (4 hours), Steady high (2 hours), Pulse (8 hours), Daytime Flash (25 hours) - Lumens and burn times certified by Labsphere Illumia Light Measurement System to FL1 standard - Vertical Cutoff Beam to focus 200 lumens on the road ahead - CREE LED - Battery Meter for Li-ion battery - Micro USB charging cord included; 3 hour charging cycle - Weatherproof exterior for all season riding - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Includes UV-proof quick on/off handlebar mount - Weight: 57 g (2 oz)

The Gravity Tail Light has a built-in accelerometer that detects deceleration or swerving and automatically changes to a super-bright, solid beam to warn following traffic. - Automatic accelerometer brake light function shines 100 lumens bright - 2 Modes (runtime): Solid - 20 lumens (12 hours), Flash - 80 lumens (30 hours) - USB-rechargeable li-polymer battery - Includes brackets for seatpost and seatstay mounting

Portland Design Works' Spaceship 3 Headlight/Radbot 500 Taillight Set offers bright LED lights, front and rear, for super nighttime visibility. The Spaceship 3 headlight focuses three brilliant LEDs through a precision lens, illuminating your course ahead. Powered by 2xAA batteries, the Spaceship 3 includes both steady and flashing modes for up to 100 hours of run time. Includes the Mission Control 2.0 mount. The RADBOT 500 is equipped with a blazing 0.5 watt LED and a large precision reflector to provide visibility to your backside. Powered by 2xAAA batteries, the RADBOT has three modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time. It also features an on/off switch that must be depressed for 1.5 seconds to turn the light on and off. This helps prevent the RADBOT from being accidentally turned on when you're transporting it in your pocket or bag off the bike. Spaceship 3: - Three bright white LEDs - Runs on 2xAA batteries (included) for up to 100 hours of run time - 2 Modes: Steady and Flashing   - Weatherproof exterior for all season riding - Includes Mission Control 2.0 mount  - Weight: 91 g (3.2 oz) - Lifetime PDWarranty Radbot 500: - 0.5 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty

The City Rover is a USB-rechargeable headlight with a powerful lithium-ion battery and a darkness destroying CREE LED bulb. Its precision reflector provides superior luminous guidance to the front and side for up to 20 hours of ride time. The City Rover will run for an additional 15 minutes in low-power safety mode after the low-battery indicator light comes on. - Additional 15 minutes in low-power safety mode after low-battery indicator light comes on - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Micro USB charging cord included; 5.5-hour charging cycle - 5 Modes (burn time): Steady High 500 Lumens 2 hours, Steady Medium 250 Lumens 4 hours, Steady Low 125 - Lumens 8 hours, Pulse 400 Lumens 16 hours, Daytime Flash 400 Lumens 36 hours

The City Rover is a USB-rechargeable headlight with a powerful lithium-ion battery and a darkness-destroying CREE LED bulb. Its precision reflector provides superior luminous guidance to the front and side for up to 20 hours of ride time. The City Rover will run for an additional 15 minutes in low-power safety mode after the low-battery indicator light comes on. - Additional 15 minutes in low-power safety mode after low-battery indicator light comes on - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Micro USB charging cord included; 5.5-hour charging cycle - 5 Modes (burn time): Steady High 700 Lumens 2 hours, Steady Medium 350 Lumens 4 hours, Steady Low 200 - Lumens 8 hours, Pulse 600 Lumens 16 hours, Daytime Flash 600 Lumens 36 hours

The PDW Kepler E-Bike Headlight works with any 6V-15V e-bike system, and it comes packed with 350 lumens and a sturdy stainless steel fork mount. The Kepler E-bike Headlight comes equipped with a Bosch-friendly plug pre-installed for quick attachment to any Bosch e-bike system. For other e-bike installations, the Bosch plug can simply be clipped off, and the light functions just the same directly wired up. - Works with 6-15V systems - Mounts to fork crown with steel bracket - Features a cut-off beam to not blind oncoming riders

This PDW light set consists of the Pathfinder 200 lumen USB-rechargeable headlight and the Io USB-rechargeable taillight. The Pathfinder 200 has a powerful lithium-ion battery and a darkness-destroying CREE LED bulb. The Io has 3 different modes, steady, flash, and pulse, and is perfect for urban riding. - Headlight: 4 Modes: Steady low (4 hours), Steady high (2 hours), Pulse (8 hours), Daytime Flash (25 hours) - Headlight: Vertical Cutoff Beam focuses beam into perfect bike path pattern while shielding the LED to prevent blinding oncoming traffic - Taillight: Mounts vertically or horizontally - Taillight: 3 modes (runtime) Steady (10h) Flash (20h) Pulse (20h)

The Lars Rover 810 is a USB-rechargeable headlight with a powerful lithium-ion battery and a darkness-destroying CREE LED bulb. Its precision reflector provides superior luminous guidance for up to 10 hours of ride time. The Lars Rover will run for an additional 15 minutes in low-power safety mode after the low-battery indicator light comes on. The rugged alloy construction is weatherproof and strong enough to handle the abuse of an urban commute. - 5 Modes: Steady low (6 hours), Steady medium (3 hours), Steady high (1.5 hours), Fast Flashing (20 hours), Pulse (7 hours) - Li-ion battery, CREE LED, Texas Instruments integrated circuit - Weatherproof exterior for all-season riding - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Micro USB charging cord included; 5.5-hour charging cycle - Includes UV-proof quick on/off handlebar mount

Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL